Industrial Water Basin Cleaning – Removal of Sediment, Algae & Scale in Samut Prakan
Why Should You Clean Industrial Water Basins Regularly?
A Water Basin is an essential part of industrial water circulation systems such as Cooling Towers, Chiller Systems, and Heat Exchangers.
During operation, water continuously accumulates invisible contaminants, including
Sediment: dust, metallic particles, and rust flakes
Algae: formed by sunlight and high humidity
Scale: mineral deposits from hard water
These contaminants adhere to basin walls and pipes, slowing water circulation, overworking pumps, and increasing energy consumption.
💡 Problems Caused by Neglecting Water Basin Cleaning
Reduced water flow and pressure drop
Overloaded pumps and valves
Bacterial growth (especially Legionella), hazardous to health
Corrosion, scaling, and rust damage in the system
Higher power bills and increased maintenance costs
Benefits of Basin Cleaning by Runpar
✅ Clean and clear water flow throughout the system
✅ Reduced algae and scale accumulation
✅ Extended equipment lifespan and cooling system durability
✅ Reduced load on circulation pumps
✅ Prevents bacterial contamination in water systems
Detailed Procedure for Industrial Water Basin Cleaning
The Runpar Cleaning Team follows strict industrial and safety standards (ISO / OSHA / Work Permit) to ensure efficiency and safety.
1. Pre-Inspection
Check water level, leakage points, and sediment buildup
Assess basin material condition (Concrete / Steel / FRP)
Take “Before Cleaning” photos for documentation
2. Sediment & Waste Removal
Use Submersible or Vacuum Pumps to drain the basin
Remove sludge, debris, sand, and algae from the basin floor
3. High-Pressure & Chemical Cleaning
Wash basin walls and floor using high-pressure water jets
Apply Runpar Chemical Formulation to dissolve scale, algae, and rust
Scrub stubborn deposits and rinse thoroughly with clean water
4. Pipe Flushing
Flush all circulation pipes and valves to remove trapped residue
Verify water flow and pressure (Flow Rate) after flushing
5. Water Refill & Quality Balancing
Refill the system with clean water
Test water parameters (pH, Conductivity, Hardness, TDS)
Add preventive chemicals:
Anti-Scale Chemical → Prevents new scale formation, Rust Inhibitor → Protects against corrosion and Biocide / Algaecide → Suppresses bacteria and algae growth
6. Final Inspection & Report
Perform a full operation test after cleaning
Capture Before–After photos
Issue a complete service report and Certificate of Cleaning
Chemicals Used and Safety Standards
Runpar Co., Ltd. manufactures and supplies premium-grade industrial cleaning chemicals,
tested and certified under MSDS (Material Safety Data Sheet) for safety and environmental compliance.
| Chemical Type | Main Function | Safety / Key Properties |
|---|---|---|
| Anti-Scale Chemical | Removes & prevents mineral scale | Inhibited formula, non-corrosive, safe for FRP & metals |
| Rust Remover & Inhibitor | Dissolves rust & provides new protection layer | Acid-free, safe for metal surfaces |
| Biocide & Algaecide | Kills and inhibits algae & bacteria | Legionella control formula, safe for operators |
| Neutralizer | Balances pH after cleaning | Neutralizes acidity before discharge |
🔹 All Runpar Chemicals are designed specifically for water system cleaning — non-harmful to metal, pipework, or cooling equipment.
Safety First — Professional On-Site Procedures
Runpar’s field technicians strictly adhere to safety standards:
Full PPE (gloves, goggles, respirators, safety boots)
Lockout/Tagout (LOTO) applied before maintenance
All chemicals verified with MSDS documentation
Certified Safety Officer supervises every cleaning project
Results After Runpar Basin Cleaning Service
✨ Crystal-clear water and improved flow circulation
⚙️ Lighter pump load and reduced energy consumption
🌿 No algae or odor in the water system
🧱 Basin walls completely free of scale and rust stains
📄 Complete Before–After report with Certificate of Service
Service Coverage by Runpar Co., Ltd.
Comprehensive industrial water basin and cooling system cleaning service available in:
📍 Samut Prakan – Chonburi – Rayong – Chachoengsao – Bangkok – EEC Region
Also serving factories, hospitals, high-rise buildings, and government facilities nationwide.
Runpar Co., Ltd. 72 Soi 1, Srisamut Road, Paknam Subdistrict, Mueang Samut Prakan District, Samut Prakan 10270, Thailand